SPTC Ltd

  1. Home
  2. Autocheck
  3. Emission Touchscreen TS GP-20S
Emission Touchscreen GP-20GN GP-20S Download

Autocheck Touchscreen Gas & Smoke

Alat Uji Emisi Gas Buang Bensin dan Solar (Touchscreen)

Autocheck Model GP-20GN/GP-20S Gas & Smoke Analyzer adalah kombinasi 2 (dua) alat yang dipadukan dalam satu sistem yang mengintegrasikan Gas (CO, CO2, HC, O2, Nox, Lamda, atau AFR) untuk mengukur gas buang kendaraan mobil Bensin atau LPG/CNG dan kendaraan DIESEL/SOLAR (Smoke Opacity) sebagai satu kesatuan.

Dengan tampilan layar TFT sentuh (touchscreen) memberikan kesan mewah dan memudahkan dalam pengoperasian. Dan dapat pula terhubung dengan RPM/Temperatur meter yang mengukur sekaligus secara bersamaan. Dan kami menawarkan RPM/OIL Temp independen yang dapat mengukur secara terpisah tanpa harus terhubung dengan alat uji emisi.

Kualitas Produk

  • Diproduksi oleh teknisi SPTC Korea yang berpengalaman.

Standar

  • Telah memenuhi standar OIML Class 0 – BAR 97 dan 11614, SAE J1667 and European Directive EEC 72/306

Aksesories Tambahan

  • Trolley, RPM/OIL Temp, NOx Sensor, CD Software.

E-Commerce

Gas Analyzer teleh memenuhi persyaratan kinerja ASM/BAR97, OIML Kelas 1&0, Teknik ini mengukur jumlah ligh yang dikumpulkan oleh sampel pada skala opasitas nol hingga opasitas dengan ketidak pastian nol yang menunjukkan tidak ada asap dalam sel sampel dan kriteria desain opasitas sesuai dengan standar Prancis NF R 10-025, PTB EO 18-09 Jerman, draf ISO 11614 dan spesifikasi ECE R24, Lampiran 8/9.

Autocheck Model GP-20GN also calculates LAMBDA and AFR (Air Fuel Ratio), GP-20S Diesel Smoke Opacity N and K M‾¹

RPM/OIL Temp RPM/OIL Temp

Features :

  1. Reads continuous measurements either in service garage or in vehicle under load.
  2. Emission measurement gasoline, LPG, CNG.
  3. 2nd vessel filter for smoke.
  4. soot concentration (5), light absortion coefficient (K) (m‾¹)
  5. 2 in 1 type: soot concentration + RPM.
  6. 7 inch LCD Touchscreen display operation 1024 x 600mm (HDMI).
  7. Built in sound function
  8. Fast warm-up time (within 60 seconds) and fast responsive (within 10 seconds).
  9. 4/5 gas setting function.
  10. Automatic zero calibration and Semi-automatic span calibration.
  11. High grade alumunium case.
  12. Self-diagnostic.
  13. Data management (save, edit, delete).
  14. Maximum accuracy, high performance, operational stability promoted bymicroprocessor control & automatic programs.
  15. Built in thermal printer.
  16. Engine temperature & RPM check kit (option).
  17. NOx sensor (option), PC software (option), Trolley (optional)
  18. Complete blocking of condesate.
Probe Gas Probe Smoke Trolley

First Filter Second Filter Third Filter

Specification :

  1. CO: 0...15 %Vol
  2. CO2: 0...20 %Vol
  3. HC: 0...30000 ppmVol
  4. O2: 0...25 %Vol
  5. NOx: 0...5000 ppm
  6. Lambda: 0,5 ÷ 3,0
  7. Photoelectric methode: Green LED (565nm) (smoke)
  8. Detector: Photodiode (smoke)
  9. Tube Length/ID: 215mm (± 0.5mm) (smoke)
  10. Measuring range: 0% ~ 100%; K-value: 0.00 ~ 16.06m‾¹ (smoke)
  11. Preheating time: within 5 minutes (smoke)
  12. RPM: 400 ÷ 9999 rpm
  13. Oil temperature: 0 ÷ 150 °C
  14. Internal temperature: 0 ÷ 50 °C
  15. Serial Port: USB BlueLinkx
  16. Warm-up time: 60 seconds
  17. PC control program RS-232
  18. Power supply: DC12V ~ 24V (smoke); 110/220; 50 ~ 60 hz; 120 Watt (gas)