Features :

1. 59-key QWERTY and functional alphanumerical waterproof keyboard.
2. Highly efficient BLU LED display with digits 15mm high. Configurable screens.
3. Blue backlit LCD graphic 25x100mm display.
4. Easy to clean ABS waterproof IP65 enclosure; resistant to harsh and corrosive environments (IP40 on version with thermal printer).
5. Dimensions: 279x124x187mm.
6. Suitable for use on the table, column, or wall.
7. Real time clock and permanent data storage.
8. Fitted alibi memory, integrated on the motherboard.
9. Selection of the programme language directly in the set-up.
10. 24-bit A/D converter, 4 channels, up to 3200 conv./sec. and up to 8 signal linearisation points.
11. 2 independent analogue channels for reading of the weight.
12. Management of 16 analog load cells of 350 Ohm (45 cells at 1000 Ohm);
13. NOTE: for the management of digital load cells for weigh bridges, see the range of touchscreen indicators.
14. Up to 10.000e OIML or 3 x 3000e @ 0,3 µV/d CE-M legal for trade.
15. Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points.
16. Connectable to printers and labellers with the command drivers.
17. 110-240 Vac power supply; built-in rechargeable battery for use in prolonged absence of the power mains.

I/O Section :

1. RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
2. RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
3. PROFIBUS serial interface (DGT100PB model).
4. 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
5. 2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min - 20 mA max, with configurable functions.
6. 16-bit analogue output (DGT100AN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 300 Ohm; minimum applicable voltage resistance: 1 kohm.

DGT100BC / DGT100AN / DGT100PB Function :

1. THROUGH KEYBOARD:
   1. Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
2. PROGRAM FUNCTIONS:
1. Setpoint, high resolution, peak, alibi memory, unit of measure conversion.
3. EXTERNAL INPUT:
1. Simulation of key pressure; Keyboard lock.
4. MOSFET OUTPUT:
1. Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
5. SERIAL PORTS:
1. On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
2. DGT100BC and DGT100AN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
6. THROUGH 16 bit ANALOGUE OUTPUT (DGT100AN):
1. Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).